IEC60598-1 Impact Test Device with 50mm Steel Ball

IEC60598-1 Impact Test Device with 50mm Steel Ball

1.  Introduction

The impact test device with a steel ball is designed according to IEC60598-1 and IEC60950-1 clause 4.2.5. It is applied to do the drop impact test for external surface of enclosure. The device can do vertical free fall impact and horizontal pendulum impact, it has the features of easy operation and high accuracy.

A sample consisting of complete enclosure is supported in its normal position, a solid smooth steel ball with 50mm diameter and 500g±25g mass is permitted to fall freely from rest through a vertical distance of 1.3m onto the sample.   I n addition, the steel ball is suspended by a cord and swung as pendulum in order to apply a horizontal impact, dropping through a vertical distance of 1.3m onto the sample, alternatively, the sample is rotated 90 degrees about each of its horizontal axes and the ball dropped as in the vertical impact test. the impact test is appl i ed to the face of a cathode ray tube, the platen glass of equipment, the surface of enclosure of stationary equipment and a flat panel display.

2.  Specification

●  Impact steel ball: Φ50mm, 500±25g

●  Fall height: 0.5-1.5m

●  Up and down mode: power-driven

●  Clamping release way: power control

3. Picture